Hysol Epoxy Inks

Enthone MacDermid - Hysol 2 Part Epoxy Inks

ENTHONE MacDermod, formerly HYSOL®, Epoxy ink is a permanent, two-component, epoxy-based marking ink. These inks may be used with a selection of catalysts which cure at elevated and/or room temperatures. These 2 part marking inks are used in the electronics, aerospace, automotive, appliance and decorative packing industries. Uses include the permanent marking of semiconductor components, circuit boards, connectors, dials, nameplates, panels, chassis, glass, and thermoplastics.

Characteristics: Superior adhesion to epoxy, glass, metal or other nonporous surfaces designed for rubber stamping or offset printing. Excellent resistance to abrasion, MEK, alcohol, TCE, flux removers, salt, acid and alkali solutions when properly cured.

Applications; When used with a rubber stamp, use a brayer roller or similar device to roll the ink into a thin drawn down before transferring to the stamp.

Boeing Part Number: A-A-56032D-TY-I-37038 BLACK - Harmonized Tariff Schedule Code 3208.90.0000

ENTHONE 50 – SERIES CAT L INKS

Product Code	Ink Color	Ink Finish	Deposition Method Recommended for Screen Printing
50-100R	White	Gloss	Mil SPEC: CID A-A-56032D Types I, II & III
50-110RX	White, Matte	Matte	MIL SPEC: CID A-A-56032D Types I, II & III
50-120R	White, High Hide	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-201AR	Lemon Yellow (Cd)	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-202BR	Medium Yellow (Pb Chromate)	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-206R	Bright Orange (Pb Chromate)	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-300R	Emerald Green (Pb Chromate)	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-301R	Deep Green (Pb Chromate)	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-400R	Ultramarine Blue	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-403R	Light Blue	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-506BR	Deep Red - DISCONTINUED	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-507R	Medium Red (Cd)	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-508R	Medium Red (Pb Chromate)	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-700R	Black, Carbon Pigment	Gloss	MIL SPEC: CID A-A-56032D Types I & III
50-710R	Black (low elec. Resistance)	Matte	MIL SPEC: CID A-A-56032D Types I & III
50-770R	Black (high elec. resistance)	Matte	MIL SPEC: CID A-A-56032D Types I, II & III
50-771R	Black (high elec. resistance)	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-800R	Clear	Gloss	MIL SPEC: CID A-A-56032D Types I, II & III
50-810R	Clear	Matte	MIL SPEC: CID A-A-56032D Types I, II & III

ENTHONE M-SERIES - MARKING INKS

Product Code	Ink Color	Ink Finish	Deposition Method Recommended for Marking, Roll-to-Roll Transfer Printing, Stamping
M-0-N	Black	Gloss	Meets: CID A-A-56032D Types I, III
M-0-NC	Black	Gloss	Meets: CID A-A-56032D Types I, II & III
M-2-N	Red (Cd)	Gloss	Meets: CID A-A-56032D Types I, II & III
M-4-N	Yellow (Cd)	Gloss	Meets: CID A-A-56032D Types I, II & III
M-5-N	Green	Gloss	Meets: CID A-A-56032D Types I, II & III - DISCONTINUED
M-6-N	Blue	Gloss	Meets: CID A-A-56032D Types I, II & III
M-9-N	White	Gloss	Meets: CID A-A-56032D Types I, II & III

Catalyst is sold separately.; 20/A, 45, 77, 9, B13/28, B3, No. 5.

Mixing Ink With Catalyst: Add 1 part catalyst to 6 parts ink by weight.

Enthone Catalyst

Catalyst 20/A
Catalyst B-3
Catalyst 5
Catalyst 9
Catalyst B13/28
Catalyst 77

ACCESSORY PRODUCTS

AD2001 Thinner for nominal adjustments in viscosity. Incrementally add 3-6% by weight.

AD2002 Thinner for spray applications. Add 25-40% by volume.

AD2003 Retarder to extend open time. Incrementally add 3-6% by weight.

AD3002 Flow agent to eliminate crawling, pin-holing and bubbling. Incrementally add 2-4% by weight. Mix gently to avoid over mixing.

WORNOW EPOXY INK — Rubber Stamping Enthone’s HYSOL® M-Series Wornow ink is a permanent, two-component, epoxy-based marking ink. These inks may be used with a selection of catalysts which cure at elevated and/or room temperatures. When properly applied and cured, M-Series ink has excellent adhesion to glass, metal, and thermosetting plastics. M-Series is extremely resistant to acids, alkalis, solvents, chemicals, salt spray, thermal shock, and is qualified to MIL‑I‑43553 and AA56032. HYSOL® M‑Series marking ink is used in the electronics, aerospace, automotive, appliance and decorative packing industries. Uses include the permanent marking of semiconductor components, circuit boards, connectors, dials, nameplates, panels, chassis, glass, and thermoplastics. Stocked in 10cc pack; available in BLACK or WHITE only. The 6 oz. can is available in BLACK, WHITE, YELLOW and RED.

Some of the Enthone-Hysol inks may have longer than normal lead times. Any questions call us at 714-979-1405 or email us at; Sales@HittMarking.com

48 items found

Sort By

CATALYST-TO-CHOOSE

All of the Hysol - Enthone Catalyst to Choose From

Description and curing cycles with the following catalysts; 20/A, 5, 45, 77, B-3, B13/28 and 9.

$0.00

Categories

Enthone MacDermid - Hysol 2 Part Epoxy Inks