Rear Flip Down Swivel Caster
Rear Flip Down Swivel Caster allows you to create
the perfect circles and arcs. This accessory easily lowers when needed
to paint circles and arcs, then locks in the upright position for
painting straight lines.
- Fits on all 4250 Airless, 4400 Airless, 4600 Airless, all EcoLiner and RollMaster 5000 machines
- Proudly Made in the USA
- 12 Month Warranty
MOUNTING
Remove the items from the package. Loosen the screws in the split collars of the mount (#2) and remove the top halves. Place the caster assembly (#1) at rear of the machine. Pull the release pin (#3) and rotate the caster upward to allow the caster mount halves of the collars around the bottom cross bar of the handle. (The caster mount will rest against rear of handle on both sides. See picture above for location). Attach the top halves of the collars (#2) and then center the caster and re-tighten the screws.
OPERATING
Hold the caster and pull the release pin (#3) to lower the caster. Raise the back of the machine and the caster will lock into place. When finished using the caster, lift the rear of machine and pull the release pin (#3) to lower the machine. Push the caster up with your foot until the pin locks it in upper hole.
Any questions call 714-979-1405 or email us Sales@HittMarking.com