ACMI #6050 TWO COMPONENT SEMI-PASTE EPOXY- 10.5 Gram Packet - WHITE
Properties: Superior adhesion to epoxy, glass, metal or other nonporous surfaces. Excellent resistance to
abrasion, MEK, alcohol, TCE, flux removers, salt, acid and alkali
solutions when properly cured. Designed for rubber stamping or offset
printing.
Meets: CID A-A-56032D Types I, II & III
Formerly: MIL-I-43553b
AVAILABLE COLORS: Black 27038 & White 17875 (other colors require special order and minimum).
ALTERNATE INKS: #6057 (slower dry time), #6060 (slowest dry time)
CURE: This is a room temperature cure ink, drys to handle in 6-8 hrs. and requires 4-7 days to develop
solvent resistance. May also be force cured by baking at one of the following time/temperature cycles:
150°F(66C)-90 min. or 200°F(93C)-1hr. or 250°F(121C)-30 min. or 300°F(149C)-10 min. or 350°F(177C)-6 min.
POT LIFE: Under normal conditions, 4-5 hrs. after the 2 components are mixed. Higher than normal room temperature will shorten pot life.
SHELF LIFE & STORAGE: Use within 1 year is recommended. Storage in refrigerator is suggested.
DIRECTIONS FOR USE:
For all colors except silver, mix 2 parts ink to 1 part catalyst by
weight. For silver, mix 2.4 parts ink to 1 part catalyst by weight.
Allow an induction period of 30 min, to achieve the best results. When
used with a rubber stamp, roll the ink to a thin drawn down on a glass,
metal or vinyl plate with a brayer roller or similar device before
transferring to the stamp.
AVAILABILITY: The
two components are sold as a kit in the following units: 2oz, 4oz, 8oz,
pint, quart and gallon. Together the 2 components will equal the unit
size. Black & White also available as clipak.
THINNER: ACMI
#6050 Thinner. Use a minimal amount to achieve the desired
consistency.Use only ACMI thinner, as others will adversely affect this
ink.
CLEANER: ACMI #6000 Cleaner
STATEMENT OF LIABILITY
Neither the manufacturer nor the seller shall be liable for any injury,
loss or damage arising out of the use of this product. The only
obligations of the manufacturer or the seller shall be to replace any quantity of
this product found to be defective or, at the option of the seller or manufacturer, to refund the purchase price. The purchaser or user of this product should
before use of this product, determine whether it is suitable for that
use. The user assumes all risk and liability with that use.
THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED
Any questions please call 714-979-1405 or email us at sales@HittMarking.com