|
Steel
Stamps Machine Marking |
| All
of our steel stamps are made with carbon tool steel.
They're tough enough to keep on stamping long after
other stamps lose their face. We use a special heat
treatment so they won't shatter under stress. Each
steel stamp is manufactured to our high standards
right here in the U.S.A.
|
| It is not
unusual to overestimate the size of character
needed. A character is measured from cutting edge to
cutting edge. Impression size will vary with the depth
of penetration: |
 |
 |
Machine-made
More
marks per dollar with this economical, quality
steel stamp. Sharp characters in Gothic style
ensure deep, clear impressions. One thumb groove. |
|
| Letter
Sets (27 PC. - 26 letters & ".") |
 |
|
Number: |
Height: |
| 01271 |
1/16" |
| 02271 |
3/32" |
| 03271 |
1/8" |
| 05271 |
3/16" |
| 06271 |
1/4" |
| 08271 |
3/8" |
| 09271 |
1/2" |
- |
| Figure
Sets (9 PC.) |
 |
|
01091 |
1/16" |
| 02091 |
3/32" |
| 03091 |
1/8" |
| 05091 |
3/16" |
| 06091 |
1/4" |
| 08091 |
3/8" |
| 09091 |
1/2" |
- |
Combination
Letter &
Figure Sets (36 PC.) |
 |
|
01361 |
1/16" |
| 02361 |
3/32" |
| 03361 |
1/8" |
| 05361 |
3/16" |
| 06361 |
1/4" |
| 07361 |
5/16" |
| 08361 |
3/8" |
| 09361 |
1/2" |
 |
Hand-cut
Individually
inspected character with special hand-ground taper
to assure precision impression alignment. Character
indentification and one thumb groove. |
|
| Letter
Sets (27 PC. - 26 letters & ".") |
|
|
Number: |
Height: |
| 01272 |
1/16" |
| 02272 |
3/32" |
| 03272 |
1/8" |
| 05272 |
3/16" |
| 06272 |
1/4" |
| 07272 |
5/16" |
| 08272 |
3/8" |
| 09272 |
1/2" |
| - |
| Figure
Sets (9 PC.) |
|
|
01092 |
1/16" |
| 02092 |
3/32" |
| 03092 |
1/8" |
| 05092 |
3/16" |
| 06092 |
1/4" |
| 07092 |
5/16" |
| 08092 |
3/8" |
| 09092 |
1/2" |
| - |
Combination
Letter &
Figure Sets (36 PC.) |
|
|
01362 |
1/16" |
| 02362 |
3/32" |
| 03362 |
1/8" |
| 05362 |
3/16" |
| 06362 |
1/4" |
| 07362 |
5/16" |
| 08362 |
3/8" |
| 09362 |
1/2" |
 |
Heavy-duty
Made
to meet the demands of rigid service. Extra heavy,
extra length shank with heavy supporting bevel.
Character indentification and size, three thumb
grooves. |
|
| Letter
Sets (27 PC. - 26 letters & ".") |
|
|
Number: |
Height: |
| 00273 |
1/32" |
| 01273 |
1/16" |
| 02273 |
3/32" |
| 03273 |
1/8" |
| 04273 |
5/32" |
| 05273 |
3/16" |
| 06273 |
1/4" |
| 07273 |
5/16" |
| 08273 |
3/8" |
| 09273 |
1/2" |
| 10273 |
5/8" |
| - |
| Figure
Sets (9 PC.) |
|
|
00093 |
1/32" |
| 01093 |
1/16" |
| 02093 |
3/32" |
| 03093 |
1/8" |
| 04093 |
5/32" |
| 05093 |
3/16" |
| 06093 |
1/4" |
| 07093 |
5/16" |
| 08093 |
3/8" |
| 09093 |
1/2" |
| 10093 |
5/8" |
| - |
Combination
Letter &
Figure Sets (36 PC.) |
|
|
00363 |
1/32" |
| 01363 |
1/16" |
| 02363 |
3/32" |
| 03363 |
1/8" |
| 04363 |
5/32" |
| 05363 |
3/16" |
| 06363 |
1/4" |
| 07363 |
5/16" |
| 08363 |
3/8" |
| 09363 |
1/2" |
 |
Reversed
For
use in marking plastic molds, rubber molds, thin
metal patterns, forging dies, etc. Produces a
reversed impression in the mold which makes a
raised letter on the molded product. Character
indentification and size, three thumb grooves. |
|
| Letter
Sets (27 PC. - 26 letters & ".") |
|
|
Number: |
Height: |
| 00274 |
1/32" |
| 01274 |
1/16" |
| 02274 |
3/32" |
| 03274 |
1/8" |
| 04274 |
5/32" |
| 05274 |
3/16" |
| 06274 |
1/4" |
| 07274 |
5/16" |
| 08274 |
3/8" |
| 09274 |
1/2" |
| - |
| Figure
Sets (9 PC.) |
|
|
00094 |
1/32" |
| 01094 |
1/16" |
| 02094 |
3/32" |
| 03094 |
1/8" |
| 04094 |
5/32" |
| 05094 |
3/16" |
| 06094 |
1/4" |
| 07094 |
5/16" |
| 08094 |
3/8" |
| 09094 |
1/2" |
| - |
Combination Letter &
Figure Sets (36 PC.) |
|
|
00364 |
1/32" |
| 01364 |
1/16" |
| 02364 |
3/32" |
| 03364 |
1/8" |
| 04364 |
5/32" |
| 05364 |
3/16" |
| 06364 |
1/4" |
| 07364 |
5/16" |
| 08364 |
3/8" |
| 09364 |
1/2" |
 |
Round
face - Full characters
The
cutting edge of the character is 1/32" radius,
with a 40 degree bevel. Rounded character stamp
makes low-stress impressions suitable for use
anywhere metal strength is critical. The aircraft,
missile, oil supply and nuclear power industries
depend on these stamps to avoid risk of fracture
from too sharp an imprint. Character indentification
and size, three thumb grooves. |
|
| Letter Sets (27 PC. - 26 letters
& ".") |
|
|
Number: |
Height: |
| 03275 |
1/8" |
| 05275 |
3/16" |
| 06275 |
1/4" |
| 07275 |
5/16" |
| 08275 |
3/8" |
| 09275 |
1/2" |
| - |
| Figure Sets (9 PC.) |
|
|
03095 |
1/8" |
| |
05095 |
3/16" |
| |
06095 |
1/4" |
| |
07095 |
5/16" |
| |
08095 |
3/8" |
| |
09095 |
1/2" |
| - |
Combination Letter &
Figure Sets (36 PC.) |
|
|
03365 |
1/8"
|
| 05365 |
3/16" |
| 06365 |
1/4" |
| 07365 |
5/16" |
| 08365 |
3/8" |
| 09365 |
1/2" |
 |
Round
face - Dot design characters
The
cutting edge of the character is 1/32" radius,
with a 40 degree bevel. For use in aircraft, missile,
oil supply and nuclear power industries and other
applications where lowest stress impressions are
critical. Round face - dot design eliminates risk
of fracture from too sharp an impression. Character
indentification and size, three thumb grooves. |
|
| Letter Sets (27 PC. - 26 letters
& ".") |
|
|
Number: |
Height: |
| 03276 |
1/8" |
| 05276 |
3/16" |
| 06276 |
1/4" |
| 07276 |
5/16" |
| 08276 |
3/8" |
| 09276 |
1/2" |
| - |
| Figure Sets (9 PC.) |
|
|
03096 |
1/8" |
| 05096 |
3/16" |
| 06096 |
1/4" |
| 07096 |
5/16" |
| 08096 |
3/8" |
| 09096 |
1/2" |
| - |
Combination Letter &
Figure Sets (36 PC.) |
|
|
03366 |
1/8" |
| 05366 |
3/16" |
| 06366 |
1/4" |
| 07366 |
5/16" |
| 08366 |
3/8" |
| 09366 |
1/2" |
| Deluxe
Bar Marker |
 |
- Variable
Speed
- 2
HP Motor with Gear Reduction
- Hex
Stock Capacity 1/4" to 2 7/8"
- Accepts
3" O.D. x .750 I.D. Bar Marking Dies
|
| Junior
Roll Marker |
| |
This
machine is designed to meet your present and future
Roll Marking requirements. Single hand control allows
machine to mark in both directions to increase die
life and speed of marking.
Air cylinders are sized to your present requirements
for saving shop air. If future requirements require
additional power cylinders can be added without alterations
to base machine.
Power: Air or Hydraulic
Stroke: to 5"
Max. Diameter: to 9 1/2" - Designed for marking
1, 2 or 3 lines in steel, brass, aluminum, etc.
Height: 23"
Width: 14"
Weight: 200lbs. ( approx. shipping )
Applications: Impression marking round, solid, tubular
or mill finished materials. Head marking of special
fasteners and aircraft parts.
|
| Carton
Marker |
| |
Easy
to Operate
Ideal for Cell Marking
Quick Change Tool Feature
Minimal Maintenance Required
4" Diameter Air Cylinder
1" Stroke
Requires min. 60 psi Air Pressure
|
| Hydraulic
Roll Markers |
| |
This
machine is designed to meet your present and future
Roll Marking requirements. Single hand control allows
machine to mark in both directions to increase die
life and speed of marking.
Air cylinders are sized to your present requirements
for saving shop air. If future requirements require
additional power cylinders can be added without alterations
to base machine.
Power: Air or Hydraulic
Stroke: to 5"
Max. Diameter: to 9 1/2" - Designed for marking
1, 2 or 3 lines in steel, brass, aluminum, etc.
Height: 23"
Width: 14"
Weight: 200lbs. ( approx. shipping )
Applications: Impression marking round, solid, tubular
or mill finished materials. Head marking of special
fasteners and aircraft parts.
|
| Numbering
Heads |
| |
Ideal
when stamping Date and Part No.'s requiring frequent
changes.
Special wheels can be engraved with any combination
of figures & letters. Sharp Face for Metal and
Flat Face for Hot Stamping.
These units are available in all sizes.
|
| TYPE
HOLDERS |
| |
Quick-change
and lite-duty type holders are constructed from select
shock tool steel and designed to give you years of
precision marking.
These holders feature a quick-release button for easy
loading or removal of type.
Each holder will accommodate Mercury Steel Type characters
1/32-inch thru' 5/16-inch high.
Available with a shepherd hook locking pin for easy
loading or a machined retainer for permanent locking
of steel marking type.
Standard openings from 5/8-inch to 2-1/2 inch single
and double line capacity.
Special type holders for specific tooling and marking
problems are also available.
|
|
|
|
